HAIPETTM is a kind of masterbatch of 75-85% Calcium Carbonate (CaCo3) with 15-25% specially blended polyolefin resin. It is an additive for polyolefin and usually mixed with polyolefin resins (LDPE, HDPE, PP).
As it is in the form of masterbatch, it is easily mixed with polyolefin.
Advantages
HDPE & PP Flat Yarn (Woven Bag)
* Anti-vertical tearing of the yarn
* Anti-fibrilation of the yarn
* Better printability on the surface of the woven cloth
* Anti slip effect on the yarn, cloth and bags
*Greater tensile strength of the yarn after stretching
* The yarn has a stiff, so the cloth and bags tend to be firmer and more stable
* It is more easily processed into bags because of easy handling at the looms and machines
LDPE, HDPE & PP Blow Film (Inflation Film)<
* Anti-blocking effects
* Improvement of printability on the film surface
* Diminishing of the gloss on the film surface
* Cost reduction of the white color pigment
* Better productivity due to better output of the materials
LDPE, HDPE & PP Injection Moulding
* Improvement of the dimension stability due to less shrinkage
* The finished products ar solid-looking, like plaster works
* Reduction of material cost by using HAIPET as a filler
* Improvement of productivity due to the faster shot cycle
* Higher heat resistance
* Higher flexural-rigidity
HDPE & PP Twin & String
* Anti-Slip effect
* Better resilence
* More pleasant to the touch
* The finished products undergo a change in cellular structure after stretching, therefore it is possible to use HAIPET as a filler.
PP Band
* Anti Vertical tearing
* Better productivity due to better output of the materials
* Anti-slip of the bands
* Better and easier heat sealing
HAIPET™ 60PP
HAIPETTM 60PP is a kind of masterbatch of 81% Calcium Carbonate (CaCo3) with 19% specially blended polyolefin resin.
HAIPET™ can be mixed easily with polyolefine resins due to its pellet form.
It reduces production cost and gives calorific quantity and dimensional stability, better printability and productivity.
*Application*
– PP Injection
– PP Woven Bag
– PP Strapping Band
Since a damp atmosphere is bad for CaCo3, it is better to dry HAIPET™
Physical Properties:
(These typical properties value are intended to serve as guide only, and not as specification limits)
| Test Item | Unit | Test Method | Specification | |
| 1. | Melt Index (E Type) | g/10 min | ASTM D-1238 | 10~30 |
| 2. | Specific Gravity | — | ASTM D-792 | 1.9 |
| 3. | CaCO3 (Ash) Content | % | MAKER’S STD | 81 |
| 4. | Moisture Content | % | MAKER’S STD | Max 0.2 |
| 5. | Dispersion Test | – | MAKER’S STD | Pass |
| 6. | CaCO3 Particle Size | mesh | MAKER’S STD | 1000 |
| 7. | Carrier Resin | — | — | PP |
| 8. | TiO2Content | % | — | |
| 9. | Additive | — | — |
Packing: 25 kgs net in PP woven bag or kraft paper bag.
Exclusively distributed by Halim Biotech Pte Ltd and Juhalim Biotech Sdn Bhd.
HAIPET™ 160PP
HAIPETTM 60PP is a kind of masterbatch of 80% Calcium Carbonate (CaCo3) with 20% specially blended polyolefin resin.
| Test Item | Unit | Test Method | Specification | |
| 1. | Melt Index (E Type) | g/10 min | ASTM D-1238 | 10 – 25 |
| 2. | Specific Gravity | — | ASTM D-792 | 1.90 |
| 3. | CaCO3 (Ash)Content | % | MAKER’S STD | 80 |
| 4. | Moisture Content | % | MAKER’S STD | Max 0.2 |
| 5. | Dispersion Test | – | MAKER’S STD | Pass |
| 6. | CaCO3 Particle Size | mesh | MAKER’S STD | 1200 |
| 7. | Carrier Resin | – | – | PP |
| 8. | TiO2 content | % | — | 0.3 |
| 9. | Additive | — | — |
Packing: 25 kgs net in PP woven bag or kraft paper bag.
HAIPET™ 210L
HAIPETTM 210L is a kind of masterbatch of 80% Calcium Carbonate (CaCo3) with 20% specially blended polyolefin resin.
It can be mixed easily with polyolefine resins due to its pellet form.
It reduces production cost and gives calorific quantity and dimensional stability, better printability and productivity.
*Application*
– PP Wovenbag
– Injection
– PP Strapping Band
– Blow Film
Since a damp atmosphere is bad for CaCo3, it is better to dry HAIPET™.
Physical Properties:
(These typical properties value are intended to serve as guide only, and not as specification limits)
| Test Item | Unit | Test Method | Specifications | |
| 1. | Melt Index (E Type) | g/10 min | ASTM D-1238 | 1 – 3 |
| 2. | Specific Gravity | — | ASTM D-792 | 1.90 |
| 3. | CaCO3 Content | % | MAKER’S STD | 80 |
| 4. | Moisture Content | % | MAKER’S STD | Max. 0.2 |
| 5. | Color | – | MAKER’S STD | Natural |
| 6. | Dispersion Test | – | MAKER’S STD | Pass |
| 7. | Pellet Size | mm | MAKER’S STD | 2 – 3 |
| 8. | CaCO3 Particle Size | mesh | MAKER’S STD | 1000 |
| 9. | Carrier Resin | – | – | LLDPE |
| 10. | TiO2 content | % | — | – |
| 11. | Additive | — | — | AO |
HAIPET™ 280L
HAIPETTM 210L is a kind of masterbatch of 80% Calcium Carbonate (CaCo3) with 20% specially blended polyolefin resin.
It can be mixed easily with polyolefine resins due to its pellet form.
It reduces production cost and gives calorific quantity and dimensional stability, better printability and productivity.
*Application*
– PE Film
– PP Injection
– PP Woven Bag
– PP Strapping Band
Since a damp atmosphere is bad for CaCo3, it is better to dry HAIPET™.
Physical Properties:
(These typical properties value are intended to serve as guide only, and not as specification limits)
| Test Item | Unit | Test Methods | Specifications | |
| 1. | Melt Index (E Type) | g/10 min | ASTM D-1238 | 2 ~ 6 |
| 2. | Specific Gravity | — | ASTM D-792 | 1.9 |
| 3. | CaCO3 Content | % | MAKER’S STD | 80 |
| 4. | Moisture Content | % | MAKER’S STD | Max. 0.2 |
| 5. | Color | — | MAKER’S STD | White |
| 6. | Dispersion Test | — | MAKER’S STD | Pass |
| 7. | Pellet Size | mm | MAKER’S STD | 2 ~ 3 |
| 8. | CaCO3 Particle Size | mesh | MAKER’S STD | 2000 |
| 9. | TiO2 Content | % | — | 0.5 |
| 10. | Base Resin | — | — | LLDPE |
| 11. | Additive | — | — | OBA + AO |